Code: 936
Description: Main Drive Motor initial lock failure
Indicates a problem with the main drive motor.
Indicates a problem with the main drive motor.
Remedy: 1 Main Drive Assembly (Excessive noise or vibration) Remove the controller board and run a Diagnostic Print Test in the continuous mode. Check the main drive assembly for any excessive noise or vibration. Determine if the noise is in the main drive, toner cartridge, fuser or main drive gearbox. Look for any loose or worn parts in the developer drive assembly, main drive gearbox or fuser. Repair as necessary. 2 Main Drive Motor Assembly (Excessive noise, gears ratcheting and so on) A service error code 936 - Transport Motor may be displayed. Check the voltage at J12-6 on the engine board. It measures approximately +5 V dc when the motor is not running and goes to 0 V dc when the motor is running. If incorrect, replace the engine board. If this does not fix the problem, replace the main drive motor. 3 Main Drive Motor Cable Check the continuity of the main drive motor cable. If incorrect, replace the cable. 4 Motor does not turn, no gear error code 936 or User message 201 Paper Jam displays. Check the voltages at J12 on the engine board. Pin number and voltage: J12-1 = +24 V dc J12-4 = +5 V dc (static) 0 V dc (when main drive motor running) J12-5 = + 5 V dc (static) 0 V dc (when main drive motor running) J12-6 = +5 V dc (static) +2.5 V dc (when main drive motor running) J12-7 = +5 V dc (static) 0 V dc (when main drive motor running) J12-8 = +5 V dc (static) +5 V dc (when main drive motor running) J12-11 = + 5 V dc (static) 0 V dc (when main drive motor running) If the voltage is incorrect, replace the FRUs in the following order: main drive motor assembly engine board