Code: 13
Display: Printhead Unsupported The Printhead is not supported by this All-In-One Printer.
Description: Printhead Not Supported
Remedy: Unplug the All-In-One from the electrical outlet. Open the printer cover, and check the printhead for proper installation. If properly installed, remove the printhead and wipe the tab circuit of the carrier and the printhead with a clean cloth. Reinstall the printhead, and turn on the All-In-One. If the problem remains, then replace the printhead. Service: Check the carrier connectors J22 and J23 for proper connection. If properly connected, then replace the carrier assembly with belt and cables.