Code: 929
Description: Toner sensor The toner sensor is not operating properly, the developer drive assembly is not operating properly, or the print cartridge is defective.
Remedy: Sensor Test This test is used to determine if the input tray sensors are working correctly. 1. Select the Sensor Test from the Input Tray Test menu. 2. Select the input source. Only installed sources display, but may include Tray 1, Tray 2, Tray 3, MP Feeder. 3. A list of sensors appears, depending upon the input source selected. For example, if tray 2 were selected: TP refers to tray present sensor. P refers to pass thru sensor. OP indicates the sensor is open. CL indicates the sensor is closed. Not all sources have the same set of sensors. The table below indicates which sources should display which sensors. Tray 1 Yes1 No Tray 2 Yes2 Yes3 Tray 3 No Yes3 Multipurpose feeder Yes No 1 Only available when tray 2 is installed. 2 Only available when tray 3 is installed 3 Only available if tray is 250-sheet drawer. 4. Press Return or Stop to exit the test.