Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 50 — Mimaki JV33-130

Code: 50

Display: MEDIA DETECT
Description: Paper could not be detected. The media set position or media itself is not proper.
Remedy: 1. Make sure that there is no gap between the end faces of platen and platen rubber. 2. Execute [#TEST] -[PAPER SENSOR] to obtain sensor values at the media exist position and media non-exist position. When the difference of values is more than ±50, detection is allowed. If the difference is smaller, execute the followings. 3. Clean the paper width sensor or replace with a new one. 4. Replace the ink slider PCB with a new one.

← Xem tất cả mã lỗi Mimaki JV33-130

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie