Code: 15
Display:
Description: The printing does not start at the top of the label or misprinting of one to three labels.
Remedy: • The media may not be threaded correctly. Follow the instructions for Loading Roll Media in the users manual. • The printer needs to be calibrated. Refer to the two-flash sequence of Feed Button Modes on page 33 in this section. • ZPL Label Formats - The correct media sensor may not be activated. Manual calibration selects the media sensing method for the labels being used (refer to the MN command in the ZPL Programming Guide). • ZPL Label Formats - Verify that the Label Top (LT) command is correctly set for your application (consult the ZPL Programming Guide). • EPL Label Formats - The correct media sensor may not be activated for label dispensing, blackline or notch sensing, or for Gap/Web sensing. Manual calibration selects the media sensing method for the labels being used (refer to the O and Q commands in the EPL Programmer’s Guide). • EPL Label Formats - Verify that the Set Label Length (Q) command is correctly set for your application (consult the EPL Programmer’s Guide).