Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13 — Zebra GX430t

Code: 13

Display:
Description: The printed image does not look right.
Remedy: • The printhead is dirty. Clean the printhead. • The printhead is under temperature. • Adjust the print darkness and/or print speed. • Use the ^PR (speed) and -SD (darkness) commands referenced in the ZPL Programming Guide. • Use the D (darkness/density) and S (speed) commands in the EPL Programmer’s Guide. • Manually adjust print darkness with the six-flash sequence of Feed Button Modes on page 33. • The Windows printer driver or application software may change these settings and may require a change to optimize print quality. • The media being used is incompatible with the printer. Be sure to use the recommended media for your application, and always use Zebra-approved labels and tags. • GX Printer Models: Verify that the printer power supply in use is rated at 100 Watts of DC output. • The printhead has worn out. The printhead is a consumable item and will wear out due to friction between the media and printhead. Using unapproved media may shorten life or damage your printhead. Replace the printhead. • The platen may need cleaning or replacement. The platen (driver) roller maybe losing traction due to: • Foreign objects attached to its surface, • The rubbery smooth surface has become polished and slippery, or • There is damage to the normally smooth and flat print surface such as box knife cuts.

← Xem tất cả mã lỗi Zebra GX430t

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie