Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 31 — Zebra S4M

Code: 31

Display:
Description: The printer does not detect when the ribbon runs out. When the RIBBON parameter is set to AUTO, the printer remains in direct thermal mode (shown on the printer configuration label), even though ribbon is loaded correctly in the printer.
Causes: The ribbon-out threshold is set too high to detect the ribbon. On a sensor profile, the ribbon-out threshold (circled in Figure 27) appears above the black bars that indicate the ribbon. This happens if you calibrate the printer without ribbon and later insert ribbon without recalibrating the printer or loading printer defaults.

← Xem tất cả mã lỗi Zebra S4M

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie