Code: 2770
Description: Transfer skew error
An abnormal value is detected to transfer skew sensor.
An abnormal value is detected to transfer skew sensor.
Causes: Improper installation transfer belt unit. Defective connector cable or poor contact in the connector. Defective transfer skew sensor. Defective engine PWB.
Remedy: Improper installation transfer belt unit. Reinstall the transfer belt unit.
Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Transfer belt unit and engine PWB (YC3)
Defective transfer skew sensor. Replace the transfer belt unit.
Defective engine PWB. Replace the engine PWB and check for correct operation.
Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Transfer belt unit and engine PWB (YC3)
Defective transfer skew sensor. Replace the transfer belt unit.
Defective engine PWB. Replace the engine PWB and check for correct operation.