Code: 7101
Description: Toner sensor K error
Sensor output value of 60 or less or 944 or more continued for 3 s.
Sensor output value of 60 or less or 944 or more continued for 3 s.
Causes: Defective connector cable or poor contact in the connector. Defective toner sensor K. Failure of locking the developer waste slot at setup. Defective engine PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Toner sensor K and front PWB (YC9) Front PWB (YC2) and engine PWB (YC10)
Defective toner sensor K. Replace developer unit K.
Failure of locking the developer waste slot at setup. Check whether the developer waste slot has been unlocked and unlock if necessary.
Defective engine PWB. Replace the engine PWB and check for correct operation.
Defective toner sensor K. Replace developer unit K.
Failure of locking the developer waste slot at setup. Check whether the developer waste slot has been unlocked and unlock if necessary.
Defective engine PWB. Replace the engine PWB and check for correct operation.