Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 6400 — Kyocera ECOSYS M3040dn

Code: 6400

Description: Zero-cross signal error
While fuser heater ON/OFF control is performed, the zerocross signal is not input within 2 s.
Causes: Fuser unit. Power source PWB. Connect right PWB. Control PWB.
Remedy: Fuser unit 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Power source PWB and connect right PWB (YC4) Connect right PWB and control PWB (YC29) 2. If the wiring is disconnected, shorted or grounded, replace the wiring.
Power source PWB Replace the power source PWB.
Connect right PWB Replace the connect right PWB.
Control PWB Replace the control PWB.

← Xem tất cả mã lỗi Kyocera ECOSYS M3040dn

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie