Code: 7400
Description: Developer unit non-installing error
Sensor output value of 31 or less continuously for 5 s.
Sensor output value of 31 or less continuously for 5 s.
Causes: Connector cable or poor contact in the connector. Toner sensor. Connect left PWB. Control PWB.
Remedy: Connector cable or poor contact in the connector Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Developer unit and drum PWB (YC3) Drum PWB and drum connect PWB (YC1) Drum connect PWB and connect left PWB (YC3) Connect left PWB and control PWB (YC2)
Toner sensor Replace the developer unit.
Connect left PWB Replace the connect left PWB.
Control PWB Replace the control PWB and check for correct operation.
Toner sensor Replace the developer unit.
Connect left PWB Replace the connect left PWB.
Control PWB Replace the control PWB and check for correct operation.