Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 2330 — Kyocera ECOSYS P7035cdn

Code: 2330

Description: Fuser pressure change motor (overcurrent) error
When the fuser pressure change motor is driven, the fuser pressure change motor over-current detection signal is detected continuously for 8 times (800 ms) at 100 ms intervals.
Causes: Defective harness between fuser pressure change motor and engine PWB (YC615), or improper connector insertion. Defective drive transmission system of the fuser pressure change motor. Defective fuser pressure change motor. Defective engine PWB.
Remedy: Defective harness between fuser pressure change motor and engine PWB (YC615), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.
Defective drive transmission system of the fuser pressure change motor. Check if the gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective fuser pressure change motor. Replace the fuser pressure change motor.
Defective engine PWB. Replace the engine PWB.

← Xem tất cả mã lỗi Kyocera ECOSYS P7035cdn

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie