Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 6130 — Kyocera ECOSYS P7035cdn

Code: 6130

Description: Broken fuser thermistor 2 wire
Input from fuser thermistor 1 is 3 or less (A/D value) continuously for 1 second (5.5 ms x 182 times).
Causes: Defective harness between fuser thermistor 1 and paper exit PWB (YC5), or improper connector insertion. Defective harness between paper exit PWB (YC1) and engine PWB (YC602), or improper connector insertion. Broken fuser thermistor 1 wire. Fuser thermistor 1 installed incorrectly. Defective engine PWB.
Remedy: Defective harness between fuser thermistor 1 and paper exit PWB (YC5), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.
Defective harness between paper exit PWB (YC1) and engine PWB (YC602), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.
Broken fuser thermistor 1 wire. Replace the fuser unit.
Fuser thermistor 1 installed incorrectly. Replace the fuser unit.
Defective engine PWB. Replace the engine PWB.

← Xem tất cả mã lỗi Kyocera ECOSYS P7035cdn

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie