Description: Engine EEPROM reading / writing error 1. Five times consecutive detection of no response from the device for more than 5ms on reading / writing. 2. Data read in 2 places does not match 8 consecutive times. 3. Writing data and reading data does not match 8 consecutive times.
Remedy: 1 Resetting the main power The EEPROM on the engine PWB does not operate properly. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Checking the EEPROM on the engine PWB The EEPROM is not properly attached. Reattach the EEPROM on the engine PWB. Detaching and reattaching the EEPROM (Section 4 "Notes when replacing the engine PWB") 3 Checking the EEPROM on the engine PWB The EEPROM is faulty. Replace the EEPROM on the engine PWB and execute U169. Then, compare to previously output U000 maintenance report, re-enter the setting value for U053, U100, U101, U106, U140, U161, U464, U252, U034, and execute the maintenance mode in following order. U119 > U469[Manual] > U140[AC Calib] > U464[Calib] > U155[Calibration] (prepare the empty waste toner box) Detaching and reattaching the EEPROM (Section 4 "Notes when replacing the engine PWB") Maintenanc e Mode List 4 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the Engine PWB