Description: Hard Disk encryption key error 1. The encrypted password entered when replacing the main PWB is not correct. 2. Install SSD which is used in the other machine.
Remedy: 1 (When the issue occurs after replacing the main PWB) Executing U004 The encryption key after replacing the main PWB is faulty. Execute U004 when this issue occurs after replacing the main PWB. Maintenanc e Mode List 2 Replacing the HDD (abnormal sounds) The HDD is faulty. Replace the HDD when the abnormal sounds are from the HDD. Detaching and reattaching the HDD 3 Checking the connection The connector is not connected properly. The SATA cable or the wire is faulty. Reconnect the below SATA cable and connector of the wire. If there is no continuity, replace SATA cable or the wire. - HDD - main PWB Section 8 "PWBs" 4 Initializing the HDD The HDD storage data is faulty. Execute U024 [FULL] (HDD Format). Maintenanc e Mode List 5 Replacing the HDD The HDD is faulty. Replace the HDD. Detaching and reattaching the HDD 6 Replacing the main PWB The main PWB is faulty. Replace the main PWB. Detaching and reattaching the Main PWB