Description: Image processing error The print sequence jam (J010x) was detected 2 times continuously.
Remedy: 1 Checking the image data The image data is faulty. When this issue occurs only when handling the certain image data, check if the image data is faulty. 2 Checking the situation The printing operation of the certain file is faulty. Acquire the jobslogifthephenomenoncanbere producedbyspecifyingthejobwhe ntheerrorwasdetected.' Checking Job & Job Operation (Operation Guide - Section 7) 3 Checking the main PWB The connector or the FFC is not connected properly. Or, the wire, FFC, the PWB is faulty. Clean the terminal of the connectors on the main PWB, reconnect the connector of the wire, and reconnect the FFC terminal. If the wire or the FFC is faulty, repair or replace them. If not resolved, replace the main PWB. Section 8 "PWBs" Detaching and reattaching the Main PWB