Description: 24V power interruption detection 1. Detected 24 V power off signal for 1s continuously. 2. Another service call occurred when passing 100ms after detecting 24V power failure detection signal, and then 24 power supply was recovered.
Remedy: 1 Resetting the main power The printing process is not properly executed. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Checking the connection The connector is not connected properly, or the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. . Low voltage PWB - Engine PWB Section 8 "PWBs" 3 Replacing the low voltage PWB The low voltage PWB is faulty. When the +24V generation from the low voltage PWB is not stable, and it lowers, replace the low voltage PWB. Detaching and reattaching the Low Voltage PWB 4 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the Engine PWB