Description: Drum motor K steady-state error The ready signal is at the H level for 2s continuously after drum motor K becomes stable.
Remedy: 1 Checking drum motor K The drum motor K drive is faulty. Execute U030 [Drum K] to check the drum motor K operation. Check if the drive gears rotate and have no excessive load, and apply the grease (EM-LP, Part no: 7BG010009H) to the sliding section and repair the related parts so that they can rotate smoothly. Maintenance Mode List 2 Checking the connection The connector is not connected properly, or the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. . Drum motor K - Feed image PWB . Feed image PWB - Engine PWB Section 8 "PWBs" 3 Checking drum unit K The drum unit is faulty. Check if the drum or the drum screw is rotated manually, and replace the drum unit if not rotated. Detaching and reattaching the Drum Unit 4 Checking drum motor K Drum motor K is faulty. Replace drum motor K. 5 Replacing the feed image PWB The feed image PWB is faulty. Replace the feed image PWB. 6 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the Engine PWB