Description: Drum motor CMY steady-state error The ready signal is at the H level for 2s continuously after drum motor CMY become stable.
Remedy: 1 Checking drum motor CMY The drum motor CMY drive are faulty. Execute U030 [Drum COL] to check the drum motor CMY operation. Check if the drive gears rotate and have no excessive load, and apply the grease (EM-LP, Part no: 7BG010009H) to the sliding section and repair the related parts so that they can rotate smoothly. Maintenanc e Mode List 2 Checking the connection The connector is not connected properly, or the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. . Drum motor CMY - Feed image PWB . Feed image PWB - Engine PWB Section 8 "PWBs" 3 Replacing drum motor CMY Drum motor CMY are faulty. Replace drum motor CMY. 4 Checking the drum unit and the developer unit The drum unit is faulty. Check if the drum or drum screw rotates by manually and if not, replace the drum unit. Detaching and reattaching the Drum Unit 5 Replacing the feed image PWB The feed image PWB is faulty. Replace the feed image PWB. 6 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the Engine PWB