Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C6200 — Kyocera ECOSYS P8060cdn

Code: C6200

Description: IH heating error 2 The detected temperature of the edge thermistor does not reach 80 ° C within 60s after warm-up starts. During the warm-up, the detected temperature of the edge thermistor does not reach the ready display temperature within 420s after reaching 100 ° C.
Remedy: 1 Removing foreign material There is foreign material between the fuser unit and the fuser IH unit. Or, foreign material adheres on the heat roller. Remove foreign material if it is on between the fuser unit and the fuser IH unit, or on the heat roller. Then, reinstall the fuser unit. Detaching and reattaching the Fuser Unit 2 Reinstalling the fuser unit The foreign objects adhere on the drawer connection terminal of the fuser unit. Or, the drawer connector is not inserted completely. Clean the drawer connection terminal of the fuser unit. Check the pin of the drawer connector is not bent, and replace the fuser unit if it is bent. If the pin is normal, reinstall the fuser unit so that the drawer connector is securely connected. Detaching and reattaching the Fuser Unit 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Checking the connection The connector is not connected properly, or the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. . Drawer connector of the fuser unit - Feed image PWB . Feed image PWB - Engine PWB Section 8 "PWBs" 5 Replacing the fuser unit Correct temperature cantbedetectedduetothewireb reakageorthethermistorerrorin thefuserunit.Or,thefuserbeltisf aulty.' Replace the fuser unit. Detaching and reattaching the Fuser Unit 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the Engine PWB 7 Replacing the feed image PWB The feed image PWB is faulty. Replace the feed image PWB. 8 Checking the connection The connector is not connected properly, or the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. . IH PWB - Engine PWB Section 8 "PWBs" 9 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. Detaching and reattaching the IH PWB 10 Checking the connection The connector is not connected properly, or the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. . Fuser IH unit - IH PWB Section 8 "PWBs" 11 Replacing the fuser IH unit The fuser IH unit is faulty. Replace the fuser IH unit.

← Xem tất cả mã lỗi Kyocera ECOSYS P8060cdn

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie