Description: Uninstalled fuser unit The unit identification code is mismatched. The unit for other models is installed.
Remedy: 1 Replacing the fuser unit The fuser unit for other models is installed. Install the fuser unit for the applicable models. Detaching and reattaching the Fuser Unit 2 Reinstalling the fuser unit The foreign objects adhere on the drawer connection terminal of the fuser unit. Or, the drawer connector is not inserted completely. Clean the drawer connection terminal of the fuser unit. Check the pin of the drawer connector is not bent, and replace the fuser unit if it is bent. If the pin is normal, reinstall the fuser unit so that the drawer connector is securely connected. Detaching and reattaching the Fuser Unit 3 Firmware upgrade The firmware is faulty. Reinstall the engine firmware. Firmware Update 4 Checking the connection The connector is not connected properly, or the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. . Drawer connector of the fuser unit - Feed image PWB . Feed image PWB - Engine PWB Section 8 "PWBs" 5 Replacing the fuser unit The fuser unit is faulty. Replace the fuser unit. Detaching and reattaching the Fuser Unit 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the Engine PWB 7 Replacing the feed image PWB The feed image PWB is faulty. Replace the feed image PWB.