Code: C6620
Description: IH core motor rotation error 1. When detecting the home position, IH position sensor does not detect ON within 5s after IH core motor is driven under the condition of the IH position sensor is OFF. 2. When detecting the home position, IH position sensor does not detect ON after it is turned off within 5s after IH core motor is driven under the condition of the IH position sensor is ON. 3. When small size paper moves the position, IH position sensor does not detect OFF within a predetermined pulse after IH core motor is driven under the condition of the IH position sensor is ON.
Remedy: 1 Checking the fuser IH unit The connector of the fuser IH unit is not properly connected. Check if the connector pins of the fuser IH unit do not bend. If the pins bend, fix them. Next, reinstall the fuser IH unit so that the connector firmly connects. 2 Checking the IH positioning sensor The IH positioning sensor is not properly attached. Reattach the IH positioning sensor. 3 Cleaning the IH positioning sensor The IH positioning sensor cannot detect properly since it is dirty. Clean the IH positioning sensor. 4 Checking the connection The connector is not connected properly, or the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. . IH core motor (Fuser IH unit) - Feed drive unit . Feed drive PWB - Engine PWB Section 8 "PWBs" 5 Replacing the fuser IH unit The IH positioning sensor or the IH core motor is faulty. Replace the fuser IH unit. 6 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 7 Replacing the feed image PWB The feed image PWB is faulty. Replace the feed image PWB. 8 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the Engine PWB