Description: Fuser IH input excessive electric current error The input current obtained from the power microcomputer was 20A (100/120V) or 10A (200V) or more continued for 200ms.
Remedy: 1 Checking the fuser unit The fuser belt is faulty. Detach the fuser unit and check if the fuser belt is not faulty. If there is any damage, replace the fuser unit. Detaching and reattaching the Fuser Unit 2 Checking the connection The connector is not connected properly, or the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. . IH PWB - Engine PWB Section 8 "PWBs" 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. Detaching and reattaching the IH PWB 5 Replacing the fuser unit The fuser unit is faulty. Replace the fuser unit. Detaching and reattaching the Fuser Unit 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the Engine PWB