Code: C6770
Description: IH low power error After fuser unit is started to heat, fuser rotation pulse signal cant be detected continuously for 1s.Or, no electric powers supplied to IH fuse runit.(Electric power detection on the IHPWB detected a set electric powe rvalue of 30% or less for a predetermined time.)'
Remedy: 1 Checking the connection The connector is not connected properly, or the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. . Fuser IH unit - IH PWB . IH PWB - Engine PWB . Feed image PWB - Engine PWB Section 8 "PWBs" 2 Checking the fuser unit drawer connectors The fuser unit drawer connectors are not properly connected. If foreign objects adhere on the drawer pins of each drawer connector, clean the drawer pins. If the drawer pins are deformed, repair or replace it. . In case the drawer pins in the fuser unit are faulty and they cannot be repaired by cleaning and fixing: Replace the fuser unit. . In case the drawer pins in the main unit are faulty and they cannot be repaired by cleaning and fixing: Replace the wire. (Part no.: 302ND4637_). If the drawer pins are not faulty, reinstall the fuser unit into the main unit so that the drawer connectors connect each other firmly. Detaching and reattaching the Fuser Unit 3 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. Detaching and reattaching the IH PWB 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the Engine PWB 6 Replacing the feed image PWB The feed image PWB is faulty. Replace the feed image PWB. 7 Checking the cause depending on the input power The input power is improper. Change the input power. 8 Replacing the fuser IH unit The fuser IH unit is faulty. (The coil is broken.) Replace the fuser IH unit. 9 Replacing the fuser unit The belt rotation sensor in the fuser unit is faulty. The thermostat is broken. Replace the fuser unit. Detaching and reattaching the Fuser Unit