Code: C7001
Description: Container motor error 1. After the container motor is started, ready signal does not turn on even 2s passed. 2. After the container motor is stabilized, ready signal is kept off 2s continuously
Remedy: 1 Replacing the toner container The toner container locks up and is not rotated. Replace the toner container. Replacing the Toner Container (Operation Guide - Section 10) 2 Checking the toner container drive parts The toner container drive parts are not operated properly, or the excessive load is applied to it. Execute U030 [Container Mix] to check the container motor operation. If the container motor does not operate properly, clean the drive gears and the couplings in the container drive unit and apply the grease (EM- 50LP, Part no.: 7BG010009H) to them. Maintenanc e Mode List 3 Checking the connection The connector is not connected properly, or the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. . Container motor - Feed image PWB Section 8 "PWBs" 4 Checking the toner container motor The toner container motor is faulty. Reattach the container motor and reconnect the connector. If not repaired, replace it. Detaching and reattaching the Container Motor 5 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 6 Replacing the feed image PWB The feed image PWB is faulty. Replace the feed image PWB.