Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C7200 — Kyocera ECOSYS P8060cdn

Code: C7200

Description: Inner thermistor broken (developer) Input sampling value of the T/C sensor K (machine inside thermistor) is over the standard value.
Remedy: 1 Reinstalling the developer unit The developer unit is not properly installed. Reinstall developer unit K so that the connector firmly connects. Detaching and reattaching the Developer Unit 2 Checking the connection The connector is not connected properly, or the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. . Drum/developer relay PWB - Feed image PWB Section 8 "PWBs" 3 Developer unit replacement Developer unit K (T/C sensor K) is faulty. Replace developer unit K. Detaching and reattaching the Developer Unit 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 5 Replacing the drum/developer relay PWB The drum/developer relay PWB is faulty. Replace the drum/developer relay PWB. Detaching and reattaching the Drum/ Developer relay PWB (Section 4 "Detaching and reattaching the waste toner box unit") 6 Replacing the feed image PWB The feed image PWB is faulty. Replace the feed image PWB.

← Xem tất cả mã lỗi Kyocera ECOSYS P8060cdn

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie