Description: PH motor error 3 Object: 1000-sheet finisher, 4000-sheet finisher (When punch unit is installed) The home position detection does not turn off within 50ms when initializing the home position.
Remedy: 1 Checking the punch unit The punch unit is not assembled properly. If the punch unit does not move manually, repair the position where restricts the operation. 2 Checking the PH cam drive parts The PH cam drive parts are not attached properly, or faulty. Reattach the PH cam drive parts. If not repaired, replace them. 3 Checking the connection The connector is not connected properly, or the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. . PH motor - PH PWB . PH PWB - DF PWB Section 8 "PWBs" 4 Replacing the PH motor The PH motor is faulty. Execute U240 [Motor] > [Punch]. If the PH motor does not operate properly, replace it. Maintenanc e Mode List 5 Firmware upgrade The firmware is not the latest version. Upgrade the PH firmware to the latest version. Firmware Update 6 Replacing the PH PWB The PH PWB is faulty. Replace the PH PWB. Detaching and reattaching the PH PWB (PH- 7A/C/D Installation Guide) 7 Replacing the DF PWB The DF PWB is faulty. Replace the DF PWB. Detaching and reattaching the DF PWB