Description: DF paddle motor error Object: 1000-sheet finisher, 4000-sheet finisher 1. The DF paddle sensor does not turn on even 1s passed when the DF paddle motor drives. 2. The DF paddle sensor does not turn off even if it drives for 1s from on condition.
Remedy: 1 Checking the DF paddle drive parts The DF paddle drive parts are not properly attached, or it is faulty. Reattach the DF paddle drive parts. If not repaired, replace them. 2 Checking the connection The connector is not connected properly, or the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. . DF paddle motor - DF PWB . DF paddle sensor - DF PWB Section 8 "PWBs" 3 Replacing the DF paddle motor The DF paddle motor is faulty. Execute U240 [Motor] > [Beat]. If the DF paddle motor does not operate properly, replace it. Maintenanc e Mode List 4 Replacing the DF paddle sensor The DF paddle sensor is faulty. Execute U241 [Finisher] > [Lead Paddle]. If the DF paddle sensor does not operate properly, replace it. Maintenanc e Mode List 5 Replacing the DF PWB The DF PWB is faulty. Replace the DF PWB. Detaching and reattaching the DF PWB