Description: DF middle motor HP detection error Object: 1000-sheet finisher, 4000-sheet finisher J790X (Middle paddle jam) was detected 2 times continuously.
Remedy: 1 Checking the DF paddle drive parts The DF paddle drive parts are not properly attached, or it is faulty. Reattach or replace the DF paddle drive parts. 2 Checking the connection The connector is not connected properly, or the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. . DF middle motor - DF PWB . DF paddle sensor - DF PWB Section 8 "PWBs" 3 Replacing the DF middle motor The DF middle motor is faulty. Execute U240 [Motor] > [Middle(H)] or [Middle(L)]. If the DF middle motor does not operate properly, replace it. Maintenanc e Mode List 4 Checking the DF paddle sensor The DF paddle sensor is not properly attached, or it is faulty. Reattach the DF paddle sensor, then execute U241 [Finisher] > [Lead Paddle]. If the DF paddle sensor does not operate properly, replace it. Maintenanc e Mode List 5 Replacing the DF PWB The DF PWB is faulty. Replace the DF PWB. Detaching and reattaching the DF PWB