Description: Main program error / BF unit communication error Object: 4000-sheet finisher with the folding unit After confirming connection with the holding unit, the communication has cut off.
Remedy: 1 Checking the BF set sensor The BF set sensor is not attached properly. Reattach the BF set sensor. 2 Checking the connection The connector is not connected properly, or the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. . BF PWB - DF PWB Section 8 "PWBs" 3 Replacing the BF set sensor The BF set sensor is faulty. Execute U241 [Booklet] > [Set]. If the BF set sensor does not operate properly, replace it. Maintenanc e Mode List 4 Replacing the BF PWB The BF PWB is faulty. Replace the BF PWB. 5 Replacing the DF PWB The DF PWB is faulty. Replace the DF PWB. Detaching and reattaching the DF PWB