Description: BF staple motor error 1 Object: 4000-sheet finisher with the folding unit BF staple JAM is detected 2 times continuously. (The condition of JAM detection for the second time: after the motor is started, home position cantbedetectedeven600mspassed.)'
Remedy: 1 Checking the BF staple unit The BF staple unit is not assembled properly. If the BF staple unit does not operation manually, repair the position where restricts the operation. 2 Checking the BF staple unit drive parts The BF staple unit drive parts are not properly attached, or they are faulty. Reattach the BF staple unit drive parts. If not repaired, replace them. 3 Checking the connection The connector is not connected properly, or the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. . BF staple unit - DF PWB Section 8 "PWBs" 4 Replacing the BF staple unit The BF staple motor is faulty. Execute U240 [Booklet] > [Staple]. If the BF staple motor does not operate properly, replace the BF staple unit. Maintenanc e Mode List 5 Replacing the BF PWB The BF PWB is faulty. Replace the BF PWB.