Code: C8350
Description: BF side registration motor 1 error Object: 4000-sheet finisher with the folding unit BF side registration sensor 1 does not turn on after passing 1s during the initial operation.
Remedy: 1 Checking the lower BF side registration guide The lower BF side registration guide is not assembled properly. If the BF side registration lower guide does not operation manually, repair the position where restricts the operation. 2 Checking the lower BF side registration guide drive parts The BF side registration lower guide drive parts are not properly attached, or they are faulty. Reattach the BF side registration lower guide drive parts. If not repaired, replace them. 3 Checking the connection The connector is not connected properly, or the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. . BF side registration motor 1 - BF PWB . BF side registration sensor 1 - BF PWB Section 8 "PWBs" 4 Replacing BF side registration motor 1 BF side registration motor 1 is faulty. Replace BF side registration motor 1 if it does not operate properly when checking the operation at U240. Maintenanc e Mode List 5 Checking BF side registration sensor 1 BF side registration sensor 1 is not properly attached, or it is faulty. Reattach BF side registration sensor 1, then execute U241 [Booklet] > [Width Up HP]. If BF side registration sensor 1 does not operate properly, replace it. Maintenanc e Mode List 6 Replacing the BF PWB The BF PWB is faulty. Replace the BF PWB.