Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C8370 — Kyocera ECOSYS P8060cdn

Code: C8370

Description: BF staple motor error 2 Object: 4000-sheet finisher with the folding unit BF staple JAM is detected 2 times continuously. (The condition of JAM detection for the second time: during the motor is operating, home position cantbedetectedeven600mspassed.)'
Remedy: 1 Checking the BF staple unit The BF staple unit is not assembled properly. If the BF staple unit does not operation manually, repair the position where restricts the operation. 2 Checking the BF staple unit drive parts The BF staple unit drive parts are not properly attached, or they are faulty. Reattach the BF staple unit drive parts. If not repaired, replace them. 3 Checking the connection The connector is not connected properly, or the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. . BF staple unit - DF PWB Section 8 "PWBs" 4 Replacing the BF staple motor The BF staple motor is faulty. Execute U240 [Booklet] > [Staple]. If the BF staple motor does not operate properly, replace it. Maintenanc e Mode List 5 Replacing the BF staple unit The BF staple unit is faulty. Replace the BF staple unit. 6 Replacing the BF PWB The BF PWB is faulty. Replace the BF PWB.

← Xem tất cả mã lỗi Kyocera ECOSYS P8060cdn

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie