Description: MB conveying motor error 1 Object: 4000-sheet finisher with the mail box The MT home position sensor does not turn on after passing 10s during the initial operation.
Remedy: 1 Checking the MT conveying roller The MT conveying roller is not assembled properly. If the MT conveying roller is not rotated manually, repair the part that restricts the operation. 2 Checking the connection The connector is not connected properly, or the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. . MT conveying motor - MT PWB . MT home position sensor - MT PWB Section 8 "PWBs" 3 Replacing the MT conveying motor The MT conveying motor is faulty. Execute U240 [Mail Box] > [Conv]. If the MT conveying motor does not operate properly, replace it. Maintenanc e Mode List 4 Checking the MT home position sensor The MT home position is not properly attached, or it is faulty. Reattach the MT home position sensor, then execute U241 [Mail Box] > [Motor HP]. If the MT home position sensor does not operate properly, replace it. Maintenanc e Mode List 5 Replacing the MT PWB The MT PWB is faulty. Replace the MT PWB.