Description: Communication error between the main unit and CPU (Communication error between the controller and the print engine) There is an error in the communication between the main PWB and the engine PWB.
Remedy: 1 Resetting the main power The communication between the controller and the print engine is faulty. Turn off the power switch and the main power switch. After 5 seconds, turn on the main power switch and the power switch. 2 Checking the connection The connector is not connected properly, or the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. . Engine PWB (YC43) - Main PWB (YC63) . Engine PWB - Low voltage PWB (YC63) Section 8 "PWBs" 3 Firmware upgrade The firmware is not the latest version. Upgrade the main firmware and the engine firmware to the latest version. Firmware Update 4 Replacing the main PWB The main PWB is faulty. Replace the main PWB. Detaching and reattaching the Main PWB 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the Engine PWB 6 Replacing the low voltage PWB Power is not supplied from the low voltage PWB to the engine PWB. If there is no output of 5V and 24V from the low voltage PWB, replace the low voltage PWB. Detaching and reattaching the Low Voltage PWB