Description: Panel engine program error The panel program cannot start up.
Remedy: 1 Firmware upgrade The firmware is not the latest version. Upgrade the panel firmware to the latest version. Firmware Update 2 Resetting the main power The panel RAM checksum is faulty. Turn off the power switch and the main power switch. After 5 seconds, turn on the main power switch and the power switch. 3 Checking the connection The connector is not connected properly, or the wire is faulty. Clean the connector on the operation panel main PWB and reconnect the connector. If there is no continuity, replace the wire. Section 8 "PWBs" 4 Replacing the operation panel main PWB The operation panel main PWB is faulty. Replace the panel main PWB. Detaching and reattaching the Operation Panel Main PWB