Code: 2000
Description: Main motor error
Pulse is not detected after 1000msec. Motor won’t stabilize after 300msec.
Pulse is not detected after 1000msec. Motor won’t stabilize after 300msec.
Causes: Defective connector cable or poor contact in the connector Defective drive transmission system of motor. Defective motor. Defective main PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. main motor and Relay PWB (YC4) Relay PWB and main PWB (YC14).
Defective drive transmission system of motor. Check if the gears rotate smoothly. If not, grease the bushes and gears. Check for broken gears and replace if any.
Defective motor. Replace the main motor.
Defective main PWB. Replace the main PWB and check for correct operation .
Defective drive transmission system of motor. Check if the gears rotate smoothly. If not, grease the bushes and gears. Check for broken gears and replace if any.
Defective motor. Replace the main motor.
Defective main PWB. Replace the main PWB and check for correct operation .