Code: 4000
Description: Polygon motor synchronize error
Polygon motor is not stabilized within 15 s since the motor is activated. After polygon motor is stabilized, the ready signal is not detected for 7 s continuously.
Polygon motor is not stabilized within 15 s since the motor is activated. After polygon motor is stabilized, the ready signal is not detected for 7 s continuously.
Causes: Defective connector cable or poor contact in the connector. Defective polygon motor. Defective main PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Polygon motor and main PWB (YC17)
Defective polygon motor. Replace the laser scanner unit .
Defective main PWB. Replace the main PWB and check for correct operation .
Defective polygon motor. Replace the laser scanner unit .
Defective main PWB. Replace the main PWB and check for correct operation .