Code: 6400
Description: Fixing control zerocross signal error
The ZCROSS signal does not reach the main PWB for more than 2 s.
The ZCROSS signal does not reach the main PWB for more than 2 s.
Causes: Defective connector cable or poor contact in the connector. Defective power source PWB. Defective main PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Power source PWB (YC103) and main PWB (YC12)
Defective power source PWB. Replace the power source PWB.
Defective main PWB. Replace the main PWB and check for correct operation.
Defective power source PWB. Replace the power source PWB.
Defective main PWB. Replace the main PWB and check for correct operation.