Code: 2610
Description: PF paper feed motor error (Paper feeder 1)
The PF paper feed motor of paper feeder 1 ready input is not given for 2 s during the PF paper feed motor is ON.
The PF paper feed motor of paper feeder 1 ready input is not given for 2 s during the PF paper feed motor is ON.
Causes: Defective harness between PF paper feed motor and PF main PWB (YC4), or improper connector insertion. Defective drive transmission system of the PF paper feed motor.YC4). Defective PF main motor. Defective control PWB.
Remedy: Defective harness between PF paper feed motor and PF main PWB (YC4), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness (Refer to the service manual for the paper feeder).
Defective drive transmission system of the PF paper feed motor. Check if the gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective PF main motor. Replace the PF main motor (Refer to the service manual for the paper feeder).
Defective control PWB. Replace the control PWB.
Defective drive transmission system of the PF paper feed motor. Check if the gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective PF main motor. Replace the PF main motor (Refer to the service manual for the paper feeder).
Defective control PWB. Replace the control PWB.