Code: E9
Description: Toner motor error
Toner motor is overloaded. TNMOC is detected by sampling every other 100 ms in 2 seconds since the main and toner motors are activated following the Replace toner Clean printer message after the Toner low TK-60 is detected.
Toner motor is overloaded. TNMOC is detected by sampling every other 100 ms in 2 seconds since the main and toner motors are activated following the Replace toner Clean printer message after the Toner low TK-60 is detected.
Causes: • Overcurrent in the toner motor circuitry due to an excessive torque, caused by hardened toner. • Defective gate array U204 on the engine board. • Improper connector insertion. • Defective harness between developer and high voltage unit. • Defective harness between high voltage unit and engine board.