Code: C0210
Description: Communication problem between the main PWB and engine PWB
• When the power is turned on, the machine does not detect the low level of SBSY and the high level of SDIR for three seconds.
• When the power is turned on, the machine does not detect the low level of SBSY and the high level of SDIR for three seconds.
Causes: Poor contact in the connector terminals. Defective main PWB or engine PWB.
Remedy: Check the connection of connectors YC7 on the main PWB and YC3 on the engine PWB, and the continuity across the connector terminals. Repair or replace if necessary. Replace the main PWB or engine PWB and check for correct operation.