Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 6030 — Kyocera FS2020D

Code: 6030

Description: Broken fuser thermistor 2 wire
Input from fuser thermistor 2 is less than 1 (A/D value) for more than 1 s.
Causes: Poor contact in the fuser thermistor 2 connector terminals. Broken fuser thermistor 2 wire. Fuser thermistor 2 installed incorrectly. Thermal cutout triggered. Fuser heater lamp installed incorrectly. Broken fuser heater lamp wire.
Remedy: Poor contact in the fuser thermistor 2 connector terminals. Reinsert the connector.
Broken fuser thermistor 2 wire. Measure the resistance. If it is ∞, replace the fuser thermistor 2.
Fuser thermistor 2 installed incorrectly. Check and reinstall if necessary.
Thermal cutout triggered. Check for continuity. If none, replace the thermal cutout.
Fuser heater lamp installed incorrectly. Check and reinstall if necessary.
Broken fuser heater lamp wire. Check for continuity. If none, replace the fuser heater lamp.

← Xem tất cả mã lỗi Kyocera FS2020D

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie