Code: 6400
Description: Zero-cross signal error
While fuser heater control is performed, the zero-cross signal is not input within 2 s.
While fuser heater control is performed, the zero-cross signal is not input within 2 s.
Causes: Defective connector cable or poor contact in the connector. Defective power source PWB or engine PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Power source PWB (YC3) and engine PWB (YC1)
Defective power source PWB or engine PWB. Replace the power source PWB or the engine PWB and check for correct operation.
Defective power source PWB or engine PWB. Replace the power source PWB or the engine PWB and check for correct operation.