Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 0900 — Brother DCP1510

Code: 0900

Display: Print Unable 09 Turn the power off and then back on again.
Description: Detected irregular power supply more than 100 times.
Remedy: 1 Low voltage power supply PCB failure Replace the low voltage power supply PCB unit. Reset the irregular power supply detection counter after replacement. 2 Main PCB failure Replace the main PCB ASSY. Note: • The irregular power supply detection error (error code: 0900) occurs when there is a large distortion in the power supply voltage supplied to the machine. In this case, if the same power supply is used, the same error may occur even when the low voltage power supply PCB unit is replaced. Ask the user to review the installation environment.

← Xem tất cả mã lỗi Brother DCP1510

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie