Code: 7400
Description: Developer unit non-installing error
Sensor output value of 31 or less continuously for 5 s.r.
Sensor output value of 31 or less continuously for 5 s.r.
Causes: Defective connector cable or poor contact in the connector. Defective toner sensor. Defective engine PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Developer unit and drum PWB (YC3) Drum PWB and relay-L PWB (YC3) Relay-L PWB and engine PWB (YC2)
Defective toner sensor. Replace the developer unit.
Defective engine PWB. Replace the engine PWB and check for correct operation.
Defective toner sensor. Replace the developer unit.
Defective engine PWB. Replace the engine PWB and check for correct operation.