Code: 4200
Description: BD steady-state error
When the value of Register BDSET is 1 after setting Register BDSET as one and passing by BD1 cycle.
When the value of Register BDSET is 1 after setting Register BDSET as one and passing by BD1 cycle.
Causes: Defective connector cable or poor contact in the connector. Defective PD PWB. Defective engine PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. PD PWB and engine PWB (YC16)
Defective PD PWB. Replace the laser scanner unit.
Defective engine PWB. Replace the engine PWB and check for correct operation.
Defective PD PWB. Replace the laser scanner unit.
Defective engine PWB. Replace the engine PWB and check for correct operation.