Code: 6000
Description: Broken fuser heater lamp M wire
The temperature does not reach 100°C/ 212°F after the fuser heater lamp M has been turned on continuously for 30 s. The fuser thermistor M detection temperature does not rise by 1°C/1.8°F after the fuser heater lamp M has been turned on continuously for 15 s during warm-up or at standby. The fuser thermistor S detection temperature does not rise by 1°C/1.8°F after the fuser heater lamp M has been turned on continuously for 10 s during warm-up or at standby. The temperature does not rise by 1°C/ 1.8°F after the fuser heater lamp M has been turned on continuously for 5 s during printing.
The temperature does not reach 100°C/ 212°F after the fuser heater lamp M has been turned on continuously for 30 s. The fuser thermistor M detection temperature does not rise by 1°C/1.8°F after the fuser heater lamp M has been turned on continuously for 15 s during warm-up or at standby. The fuser thermistor S detection temperature does not rise by 1°C/1.8°F after the fuser heater lamp M has been turned on continuously for 10 s during warm-up or at standby. The temperature does not rise by 1°C/ 1.8°F after the fuser heater lamp M has been turned on continuously for 5 s during printing.
Causes: Poor contact in the fuser thermistor M connector terminals. Fuser thermistor M installed incorrectly. Thermal cutout triggered. Fuser heater lamp M installed incorrectly. Broken fuser heater lamp M wire.
Remedy: Poor contact in the fuser thermistor M connector terminals. Reinsert the connector.
Fuser thermistor M installed incorrectly. Check and reinstall if necessary.
Thermal cutout triggered. Check for continuity. If none, replace the thermal cutout.
Fuser heater lamp M installed incorrectly. Check and reinstall if necessary.
Broken fuser heater lamp M wire. Check for continuity. If none, replace the fuser heater lamp M.
Fuser thermistor M installed incorrectly. Check and reinstall if necessary.
Thermal cutout triggered. Check for continuity. If none, replace the thermal cutout.
Fuser heater lamp M installed incorrectly. Check and reinstall if necessary.
Broken fuser heater lamp M wire. Check for continuity. If none, replace the fuser heater lamp M.