Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E35 — Toshiba DP2040

Code: E35

Description: PFP lower drawer transport jam (Paper not reaching the PFU feed sensor): The paper fed from the PFP lower drawer does not reach the PFU feed sensor after has passed the PFP lower drawer feed sensor.
Remedy: Open the side cover. there paper front the PFU feed sensor?
YES Remove the paper. Is the PFU feed sensor working? (Perform the input check the test mode: 13-[04. SENSOR TEST]
NO 1) Check if the connector of the PFU feed sensor is disconnected. 2) Check if the connector CN4 on the MAIN board is disconnected. 3) Check if the connector pins are disconnected and the harnesses are open circuited. 4) Check if the conductor pattern on the MAIN board is short circuited or open circuited. 5) Replace the PUF feed sensor. 6) Replace the MAIN board.
YES Are the PFU transport clutches (High speed/Low speed) working? (Perform the output check the test mode: 04-203, 205)
NO 1) Check if the connectors of the PFU transport clutches (High speed/ Low speed) are disconnected. 2) Check if the connector CN4 on the MAIN board is disconnected. 3) Check if the connector pins are disconnected and the harnesses are open circuited. 4) Check if the conductor pattern on the MAIN board is short circuited or open circuited. 5) Replace the PFU transport clutches (High speed/Low speed). 6) Replace the MAIN board
YES the PFP transport clutch working? (Perform the output check the test mode: 04-225)
NO 1) Check if the connector of the PFP transport clutch is disconnected. 2) Check if any of the connectors CN241, CN242 and CN244 on the PFP board is disconnected. 3) Check if the connector CN13 on the MAIN board is disconnected. 4) Check if the connector pins are disconnected and the harnesses are open circuited. 5) Check if the conductor patterns on the PFP board and MAIN board are short circuited or open circuited. 6) Replace the PFP transport clutch. 7) Replace the PFP board. 8) Replace the MAIN board.
YES 1) Check the condition of the feed roller, separation roller and pickup roller of each paper source, and replace them if they are worn out. 2) Check the transport roller. Replace it if it is worn out.

← Xem tất cả mã lỗi Toshiba DP2040

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie