Code: C58
Description: Communication error between IPC board and finisher
Remedy: (1) Check if the specified finisher is attached. (2) Check if the conductor pattern on the IPC board is short- or open-circuited. (3) Check if the connector pins connected to the connector J2 on the IPC board are disconnected or the harness is open-circuited. (4) Check if the conductor pattern on the finisher controller PC board is short- or open-circuited. (5) Check the connections between the finisher and the copier if the connector pins are disconnected, or the harnesses are open-circuited. (6) Replace the IPC board. (7) Replace the LGC board.